Merge branch 'yun-pjsip'

libs/dbus-c++/AUTHORS

-Paolo Durante	<shackan@gmail.com>

libs/dbus-c++/INSTALL

-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  6. Often, you can also type `make uninstall' to remove the installed
-     files again.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-

libs/dbus-c++/Makefile.am

-SUBDIRS = src tools data doc examples
-
-EXTRA_DIST = autogen.sh libdbus-c++.spec libdbus-c++.spec.in
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = dbus-c++-1.pc
-
-MAINTAINERCLEANFILES = \
-	configure \
-	Makefile.in \
-	aclocal.m4 \
-	compile \
-	config.guess \
-	config.sub \
-	depcomp \
-	install-sh \
-	ltmain.sh \
-	mdate-sh \
-	missing \
-	mkinstalldirs \
-	libdbus-c++.spec
-

libs/dbus-c++/SConscript

-#
-# library
-#
-
-env = WengoGetEnvironment()
-
-env.ParseConfig('pkg-config --cflags --libs dbus-1')
-
-libs = [
-	'expat'
-]
-lib_path = []
-include_path = [
-	'include'
-]
-defines = {
-	'DBUS_API_SUBJECT_TO_CHANGE':1,
-	'DEBUG':1
-}
-headers = []
-sources = [
-	'src/connection.cpp',
-	'src/debug.cpp',
-	'src/dispatcher.cpp',
-	'src/error.cpp',
-	'src/eventloop.cpp',
-	'src/interface.cpp',
-	'src/introspection.cpp',
-	'src/property.cpp',
-	'src/message.cpp',
-	'src/object.cpp',
-	'src/pendingcall.cpp',
-	'src/server.cpp',
-	'src/types.cpp',
-	'src/xml.cpp'
-]
-
-env.WengoAddDefines(defines)
-env.WengoAddIncludePath(include_path)
-env.WengoUseLibraries(libs)
-env.WengoStaticLibrary('dbus-c++', sources)
-
-#
-# tools
-#
-
-tools_env = WengoGetEnvironment()
-
-tools_libs = [
-	'dbus-c++'
-]
-tools_defines = {
-	'DBUS_API_SUBJECT_TO_CHANGE':1,
-}
-introspect_sources = [
-	'tools/introspect.cpp',
-]
-
-xml2cpp_sources = [
-	'tools/xml2cpp.cpp'
-]
-
-#tools_env.Append(LINKFLAGS = '-z origin')
-#tools_env.Append(RPATH = env.Literal('\\$$ORIGIN\.'))
-
-tools_env.WengoAddDefines(tools_defines)
-tools_env.WengoAddIncludePath(include_path)
-tools_env.WengoUseLibraries(tools_libs)
-
-dbusxx_introspect = tools_env.WengoProgram('dbusxx-introspect', introspect_sources)
-dbusxx_xml2cpp = tools_env.WengoProgram('dbusxx-xml2cpp', xml2cpp_sources)
-
-#
-# xml translator
-#
-
-def dbusxx_xml2cpp_emitter(target, source, env):
-	env.Depends(target, dbusxx_xml2cpp)
-	return (target, source)
-
-dbusxx_xml2cpp_builder = Builder(action = dbusxx_xml2cpp[0].abspath + ' $SOURCE --adaptor=$TARGET',
-	emitter = dbusxx_xml2cpp_emitter,
-	suffix = '.h', src_suffix = '.xml')
-
-Export('dbusxx_xml2cpp_builder')

libs/dbus-c++/TODO

-* Implement asynchronous method calls (hint: start from DBus::PendingCall)
-* ...and patch the codegen to generate stubs for them
-* Implement continuations in a saner way
-* Find time for some hardcore valgrinding
-* Make DBus::Server free an incoming connection when it's disconnected, not when freeing the server
-* More examples
-* Inline (Doxygen-style) documentation
-* Native protocol implementation (as an alternative to libdbus)

libs/dbus-c++/autogen.sh

-#!/bin/bash
-
-function autocmd()
-{
-	echo "Running ${1}..."
-	$* || {
-		echo "Error running ${1}"
-		exit 1
-	}
-}
-
-autocmd libtoolize --force --copy
-autocmd aclocal
-autocmd autoheader
-autocmd automake --add-missing --force-missing --copy -Wall
-autocmd autoconf
-
-echo "Autogen done, now you can ./configure"

libs/dbus-c++/configure.ac

-# Autojunk script for libdbus-c++
-
-AC_PREREQ(2.59)
-AC_INIT([libdbus-c++], 0.5.0, [shackan@gmail.com])
-
-AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION)
-AM_CONFIG_HEADER([include/dbus-c++/config.h])
-
-AC_CANONICAL_HOST
-
-AC_SUBST(PACKAGE_VERSION)
-
-
-# Set configuration options
-
-AC_ARG_ENABLE(debug,
-	AS_HELP_STRING([--enable-debug],
-		[enable debugging support]),
-	[enable_debug=$enableval],
-	[enable_debug=no]
-)
-
-AC_ARG_ENABLE(glib,
-	AS_HELP_STRING([--enable-glib],
-		[enable glib integration]),
-	[enable_glib=$enableval],
-	[enable_glib=no]
-)
-
-AC_ARG_ENABLE(doxygen-docs,
-	AS_HELP_STRING([--enable-doxygen-docs],
-		[build DOXYGEN documentation (requires Doxygen)]),
-	[enable_doxygen_docs=$enableval],
- 	[enable_doxygen_docs=no]
-)
-
-# Check for programs
-
-AC_LANG_CPLUSPLUS
-
-AC_PROG_CC
-AC_PROG_CXX
-
-CXX_FOR_BUILD=${CXX_FOR_BUILD-${CXX}}
-AC_SUBST(CXX_FOR_BUILD)
-
-AM_PROG_LIBTOOL
-
-PKG_PROG_PKG_CONFIG
-
-
-AC_MSG_CHECKING([whether $CXX supports symbol visibility])
-
-vtest=`$CXX --help --verbose 2>&1 | grep fvisibility`
-
-if test -n "$vtest"; then
-	AC_MSG_RESULT(yes)
-
-	AC_DEFINE(GCC_HASCLASSVISIBILITY, 1, [to enable hidden symbols])
-	CXXFLAGS="-fvisibility=hidden"
-else
-	AC_MSG_RESULT(no)
-fi 
-
-
-# Check for dependencies
-
-DBUS_REQUIRED_VERSION=0.60
-PKG_CHECK_MODULES(dbus, [dbus-1 >= $DBUS_REQUIRED_VERSION],,
-	AC_MSG_ERROR([You need the DBus libraries (version 0.6 or better)]
-	[http://www.freedesktop.org/wiki/Software_2fdbus])
-)
-AC_SUBST(dbus_CFLAGS)
-AC_SUBST(dbus_LIBS)
-
-DBUS_API_STABLE_VERSION=1.0.0
-PKG_CHECK_EXISTS([dbus-1 < $DBUS_API_STABLE_VERSION],
-	[AC_DEFINE(DBUS_API_SUBJECT_TO_CHANGE, , [unstable DBus])]
-)
-
-DBUS_THREADS_INIT_DEFAULT_VERSION=0.93
-PKG_CHECK_EXISTS([dbus-1 >= $DBUS_THREADS_INIT_DEFAULT_VERSION],
-	[AC_DEFINE(DBUS_HAS_THREADS_INIT_DEFAULT, , [dbus_threads_init_default (needs DBus >= 0.93)])]
-)
-
-DBUS_RECURSIVE_MUTEX_VERSION=0.95
-PKG_CHECK_EXISTS([dbus-1 >= $DBUS_RECURSIVE_MUTEX_VERSION],
-	[AC_DEFINE(DBUS_HAS_RECURSIVE_MUTEX, , [DBus supports recursive mutexes (needs DBus >= 0.95)])]
-)
-
-
-if test "$enable_glib" = "yes" ; then
-PKG_CHECK_MODULES([glib], glib-2.0)
-AC_SUBST(glib_CFLAGS)
-AC_SUBST(glib_LIBS)
-AM_CONDITIONAL(ENABLE_GLIB, test 1 = 1)
-PKG_CHECK_MODULES([gtkmm], gtkmm-2.4,
-	AM_CONDITIONAL(HAVE_GTKMM, test 1 = 1),
-	AM_CONDITIONAL(HAVE_GTKMM, test 0 = 1)
-)
-AC_SUBST(gtkmm_CFLAGS)
-AC_SUBST(gtkmm_LIBS)
-else
-AM_CONDITIONAL(ENABLE_GLIB, test 0 = 1)
-AM_CONDITIONAL(HAVE_GTKMM, test 0 = 1)
-fi
-
-AC_CHECK_LIB([expat], XML_ParserCreate_MM,
-   	[AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false)],
-	have_expat=false)
-
-if ! $have_expat; then
-	AC_MSG_ERROR([You need the eXpat xml parser]
-		[http://expat.sourceforge.net/])
-fi
-
-xml_CFLAGS=
-xml_LIBS=-lexpat
-
-AC_SUBST(xml_CFLAGS)
-AC_SUBST(xml_LIBS)
-
-AC_CHECK_LIB([pthread], pthread_create,
-	[AC_CHECK_HEADERS(pthread.h, have_pthread=true, have_pthread=false)],
-	have_pthread=false)
-
-if test "$have_pthread" = "false"; then
-	AC_MSG_ERROR([You need the POSIX Thread library (pthreads)])	
-fi
-
-if test "$enable_debug" = "yes" ; then
-	CXXFLAGS="$CXXFLAGS -Wall -ggdb -O0 -DDEBUG -Wfatal-errors -Werror"
-else
-	CXXFLAGS="$CXXFLAGS -Wall -O3"
-fi
-
-
-# Doxygen Documentation
-
-AC_PATH_PROG(DOXYGEN, doxygen, no)
-
-AC_MSG_CHECKING([whether to build Doxygen documentation])
-
-if test "$DOXYGEN" = "no" ; then
-	have_doxygen=no
-else
-	have_doxygen=yes
-fi
-
-if test "$enable_doxygen_docs" = "auto" ; then
-	enable_doxygen_docs=no
-
-	AC_MSG_RESULT(no)
-fi
-
-if test "$enable_doxygen_docs" = "yes" ; then
-	if test "$have_doxygen" = "no"; then
-		AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found])
-	fi
-
-	AC_MSG_RESULT(yes)
-fi
-
-AM_CONDITIONAL(DBUS_DOXYGEN_DOCS_ENABLED, test "$enable_doxygen_docs" = "yes")
-
-# For the tools/, we need libdbus-c++ for the "build" architecture as well
-
-AM_CONDITIONAL(CROSS_COMPILING, test "$cross_compiling" = "yes")
-
-AC_ARG_WITH(build-libdbus-cxx,
-	AS_HELP_STRING([--with-build-libdbus-cxx],
-	[For cross compilation: path to libdbus-cxx which was compiled for the 'build' system.]),
-	[ BUILD_LIBDBUS_CXX_DIR=${withval} ],
-	[ BUILD_LIBDBUS_CXX_DIR="\$(top_builddir)" ]
-)
-AC_SUBST(BUILD_LIBDBUS_CXX_DIR)
-
-
-# Save processed files
-
-AC_OUTPUT(
-	Makefile
-	src/Makefile
-	tools/Makefile
-	data/Makefile
-	doc/Makefile
-	doc/Doxyfile
-	examples/Makefile
-	examples/properties/Makefile
-	examples/echo/Makefile
-	examples/hal/Makefile
-	examples/glib/Makefile
-	dbus-c++-1.pc
-	dbus-c++-1-uninstalled.pc
-	libdbus-c++.spec
-)

libs/dbus-c++/data/Makefile.am

-EXTRA_DIST = org.freedesktop.DBus.xml
-
-MAINTAINERCLEANFILES = \
-	Makefile.in

libs/dbus-c++/data/org.freedesktop.DBus.xml

-<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
-<node>
-  <interface name="org.freedesktop.DBus.Introspectable">
-    <method name="Introspect">
-      <arg name="data" direction="out" type="s"/>
-    </method>
-  </interface>
-  <interface name="org.freedesktop.DBus.Properties">
-    <method name="Get">
-      <arg name="interface_name" direction="in" type="s"/>
-      <arg name="property_name" direction="in" type="s"/>
-      <arg name="value" direction="out" type="v"/>
-    </method>
-    <method name="Set">
-      <arg name="interface_name" direction="in" type="s"/>
-      <arg name="property_name" direction="in" type="s"/>
-      <arg name="value" direction="in" type="v"/>
-    </method>
-    <method name="GetAll">
-      <arg name="interface_name" direction="in" type="s"/>
-      <arg name="props" direction="out" type="a{sv}"/>
-    </method>
-  </interface>
-  <interface name="org.freedesktop.DBus">
-    <method name="RequestName">
-      <arg direction="in" type="s"/>
-      <arg direction="in" type="u"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="ReleaseName">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="StartServiceByName">
-      <arg direction="in" type="s"/>
-      <arg direction="in" type="u"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="Hello">
-      <arg direction="out" type="s"/>
-    </method>
-    <method name="NameHasOwner">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="b"/>
-    </method>
-    <method name="ListNames">
-      <arg direction="out" type="as"/>
-    </method>
-    <method name="AddMatch">
-      <arg direction="in" type="s"/>
-    </method>
-    <method name="RemoveMatch">
-      <arg direction="in" type="s"/>
-    </method>
-    <method name="GetNameOwner">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="s"/>
-    </method>
-    <method name="ListQueuedOwners">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="as"/>
-    </method>
-    <method name="GetConnectionUnixUser">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="GetConnectionUnixProcessID">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="GetConnectionSELinuxSecurityContext">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="ay"/>
-    </method>
-    <method name="ReloadConfig">
-    </method>
-    <signal name="NameOwnerChanged">
-      <arg type="s"/>
-      <arg type="s"/>
-      <arg type="s"/>
-    </signal>
-    <signal name="NameLost">
-      <arg type="s"/>
-    </signal>
-    <signal name="NameAcquired">
-      <arg type="s"/>
-    </signal>
-  </interface>
-</node>

libs/dbus-c++/dbus-c++-1-uninstalled.pc.in

-prefix=
-exec_prefix=
-libdir=src
-includedir=include
-
-Name: @PACKAGE@
-Description: Native C++ bindings for D-Bus, Not Installed
-Version: @VERSION@
-Requires: 
-Conflicts: 
-Libs: ${pcfiledir}/${libdir}/libdbus-c++-1.la
-Cflags: -I${pcfiledir}/${includedir}
-

libs/dbus-c++/dbus-c++-1.pc.in

-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: dbus-c++
-Description: Native C++ bindings for D-Bus.
-Requires: dbus-1
-Version: @VERSION@
-Libs: -L${libdir} -ldbus-c++-1
-Cflags: -I${includedir}/dbus-c++-1 -DDBUS_API_SUBJECT_TO_CHANGE

libs/dbus-c++/depcomp

-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2007-03-29.01
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: