Commit 434251fc authored by Emmanuel Milou's avatar Emmanuel Milou

some dbus stuff

parent d3b646d4
......@@ -19,6 +19,7 @@ libtool
# The test binary
*Tester
*orig
*.1
# Ignore rendered docs
doc/doxygen/core-doc
......
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007 Free Software Foundation, Inc.
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
......@@ -10,10 +10,7 @@ unlimited permission to copy, distribute and modify it.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
......@@ -26,9 +23,9 @@ debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
......@@ -38,17 +35,20 @@ some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
......@@ -67,9 +67,6 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
6. Often, you can also type `make uninstall' to remove the installed
files again.
Compilers and Options
=====================
......@@ -81,7 +78,7 @@ details on some of the pertinent environment variables.
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
......@@ -90,15 +87,17 @@ Compiling For Multiple Architectures
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
......@@ -191,12 +190,12 @@ them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
overridden in the site shell script). Here is a another example:
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation
======================
......
This diff is collapsed.
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2007-03-29.01
scriptversion=2005-07-09.11
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
# Foundation, Inc.
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -92,20 +91,7 @@ gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
......@@ -215,39 +201,34 @@ aix)
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test -f "$tmpdepfile"; then :
else
stripped=`echo "$stripped" | sed 's,^.*/,,'`
tmpdepfile="$stripped.u"
fi
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
rm -f "$tmpdepfile"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
......@@ -295,46 +276,6 @@ icc)
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
# Add `dependent.h:' lines.
sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
......@@ -347,13 +288,13 @@ tru64)
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
# static library. This mechanism is used in libtool 1.4 series to
# static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
# compilations output dependencies in $dir.libs/$base.o.d and
# compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
......
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2006-12-25.00
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
......@@ -39,68 +39,38 @@ scriptversion=2006-12-25.00
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
doit="${DOITPROG-}"
posix_mkdir=
# put in absolute paths if you don't have them in your path; or use env. vars.
# Desired mode of installed file.
mode=0755
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chgrpcmd=
chmodcmd=$chmodprog
chmodcmd="$chmodprog 0755"
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
dstarg=
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
......@@ -110,86 +80,81 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test $# -ne 0; do
while test -n "$1"; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-c) shift
continue;;
-d) dir_arg=true;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift;;
shift
shift
continue;;
-s) stripcmd=$stripprog;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dst_arg=$2
shift;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
done
fi
if test $# -eq 0; then
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
......@@ -199,47 +164,24 @@ if test $# -eq 0; then
exit 0
fi
if test -z "$dir_arg"; then
trap '(exit $?); exit' 1 2 13 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src;;
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
......@@ -248,199 +190,71 @@ do
exit 1
fi
if test -z "$dst_arg"; then
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst;;
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
dst=$dst/`basename "$src"`
fi
fi
obsolete_mkdir_used=false