Added the Autotools support

ChangeLog

+Jean-Philippe Barrette-LaPierre (9 June 2005) version 0.3.1
+- Added the autotools support.
\ No newline at end of file

INSTALL

+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Makefile.am

+SUBDIRS = stund src skins rings
+
+

admin/Doxyfile.am

+## generate API documentation with doxygen
+apidox-am-yes:
+	@if test "$(subdir)" != "."; then \
+		$(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\
+		if test ! -x $(top_builddir)/apidocs/common; then \
+			if test -d $(top_srcdir)/doc/common; then \
+			   common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
+			else \
+	   		   common_dir=$(kde_libs_htmldir)/en/common ;\
+			fi ;\
+			$(LN_S) $$common_dir $(top_builddir)/apidocs/common; \
+		fi ;\
+		cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
+		echo "PROJECT_NAME           = \"$(subdir) Library\"" >> Doxyfile; \
+		echo "PROJECT_NUMBER         = \"Version $(VERSION)\"" >> Doxyfile; \
+		echo "INPUT                  = $(srcdir)" >> Doxyfile; \
+		echo "IMAGE_PATH             = $(top_srcdir)/doc/api" >> Doxyfile ;\
+		echo "OUTPUT_DIRECTORY       = $(top_builddir)/apidocs" >> Doxyfile; \
+		echo "HTML_OUTPUT            = $(subdir)/html" >> Doxyfile; \
+		echo "HTML_HEADER            = $(top_builddir)/apidocs/common/header.html" >> Doxyfile;\
+		echo "HTML_FOOTER            = $(top_builddir)/apidocs/common/footer.html" >> Doxyfile;\
+		echo "HTML_STYLESHEET        = $(top_builddir)/apidocs/common/doxygen.css" >> Doxyfile;\
+		echo "LATEX_OUTPUT           = $(subdir)/latex" >> Doxyfile; \
+		echo "RTF_OUTPUT             = $(subdir)/rtf" >> Doxyfile; \
+		echo "MAN_OUTPUT             = $(subdir)/man" >> Doxyfile; \
+		echo "GENERATE_HTML          = $(GENERATE_FLAG)" >> Doxyfile ;\
+		echo "GENERATE_MAN          = $(GENERATE_FLAG)" >> Doxyfile ;\
+		echo "GENERATE_LATEX          = $(GENERATE_FLAG)" >> Doxyfile ;\
+		if test -n "$(DOXYGEN_EXCLUDE)"; then \
+			patterns= ;\
+			dirs= ;\
+			for item in `echo "$(DOXYGEN_EXCLUDE)"`; do \
+				if test -d "$(srcdir)/$$item"; then \
+					dirs="$$dirs $(srcdir)/$$item/" ;\
+			    	else \
+			        	patterns="$$patterns $$item" ;\
+				fi ;\
+			done ;\
+			echo "EXCLUDE_PATTERNS      += $$patterns" >> Doxyfile; \
+		    	echo "EXCLUDE               += $$dirs" >> Doxyfile ;\
+		fi ;\
+		echo "TAGFILES = \\" >> Doxyfile; \
+		tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \
+			tagpath= ;\
+			path="../../$$tag" ;\
+			if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \
+				tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\
+			else \
+				tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\
+				if test -n "$$tagpath"; then \
+					path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\
+				fi ;\
+			fi ;\
+			if test "$$tag" = qt; then \
+				echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\
+			else if test -n "$$tagpath"; then \
+				echo "$$tagpath=$$path/html \\" >> Doxyfile ;\
+			    fi ;\
+			fi ;\
+		done ;\
+		echo "GENERATE_TAGFILE       = $(top_builddir)/apidocs/$(subdir)/`basename $(subdir)`.tag" >> Doxyfile ;\
+		echo "IGNORE_PREFIX          = K" >> Doxyfile ;\
+		echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\
+		$(DOXYGEN) Doxyfile ;\
+	fi
+
+apidox-am-no:
+
+install-data-local: install-apidox
+
+## install API documentation
+install-apidox:
+	@if test "$(subdir)" != "."; then \
+		$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
+		if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
+		echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
+		$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
+		fi; \
+		if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
+			list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
+			echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
+			for file in $$list; do \
+				$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
+		done; \
+		fi; \
+		symlink="$(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common"; \
+		if test ! -L "$symlink" -o `readlink "$symlink" 2>/dev/null` != "$(kde_libs_htmldir)/en/common"; then \
+			echo "Creating symlink $(kde_htmldir)/en/$(PACKAGE)-apidocs/common"; \
+			rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
+			$(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
+		fi; \
+	else\
+		if test -d $(top_builddir)/apidocs; then \
+		$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
+		list=`cd $(top_builddir)/apidocs && ls -1`; \
+		echo "installing $(top_builddir)/apidocs/$$file" ;\
+		for file in $$list; do \
+			if test -f $(top_builddir)/apidocs/$$file; then \
+				$(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
+			fi; \
+		done ; fi; \
+	fi
+
+uninstall-local: uninstall-apidox
+
+## uninstall API documentation
+uninstall-apidox:
+	@if test "$(subdir)" != "."; then \
+		if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
+			rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
+		fi\
+	else\
+		if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
+			rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
+		fi\
+	fi
+
+apidox:
+	@if test "$(subdir)" != "."; then \
+		$(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
+	else \
+		$(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
+	fi
+	@set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
+	    list='$(SUBDIRS)'; \
+	    for subdir in $$list; do \
+		if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
+		echo "Making apidox in $$subdir"; \
+		if test "$$subdir" != "."; then \
+			(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \
+		fi ; fi ;\
+	    done; \
+	    for subdir in $$list; do \
+		if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
+		echo "Making apidox in $$subdir"; \
+		if test "$$subdir" != "."; then \
+			(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \
+		fi ; fi ;\
+	    done; \
+	fi
+
+apidox-am-toplevel-no:
+apidox-am-toplevel-yes:
+	@echo "*** Creating API documentation main page"; \
+	cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
+	echo "PROJECT_NAME           = \"$(DOXYGEN_PROJECT_NAME)\"" >> Doxyfile ; \
+	echo "PROJECT_NUMBER         = \"$(DOXYGEN_PROJECT_NUMBER)\"" >> Doxyfile ; \
+	echo "INPUT                  = $(top_srcdir)" >> Doxyfile ; \
+	echo "OUTPUT_DIRECTORY       = $(top_builddir)/apidocs" >> Doxyfile ; \
+	echo "FILE_PATTERNS          = *.dox" >> Doxyfile ; \
+	echo "RECURSIVE              = NO" >> Doxyfile ; \
+	echo "SOURCE_BROWSER         = NO" >> Doxyfile ; \
+	echo "ALPHABETICAL_INDEX     = NO" >> Doxyfile ; \
+	echo "HTML_OUTPUT            = ." >> Doxyfile ; \
+	echo "HTML_HEADER            = apidocs/common/mainheader.html" >> Doxyfile ; \
+	echo "HTML_FOOTER            = apidocs/common/mainfooter.html" >> Doxyfile ; \
+	echo "HTML_STYLESHEET        = apidocs/common/doxygen.css" >> Doxyfile ; \
+	echo "GENERATE_LATEX         = NO" >> Doxyfile ; \
+	echo "GENERATE_RTF           = NO" >> Doxyfile ; \
+	echo "GENERATE_MAN           = NO" >> Doxyfile ; \
+	echo "GENERATE_XML           = NO" >> Doxyfile ; \
+	echo "GENERATE_AUTOGEN_DEF   = NO" >> Doxyfile ; \
+	echo "ENABLE_PREPROCESSING   = NO" >> Doxyfile ; \
+	echo "CLASS_DIAGRAMS         = NO" >> Doxyfile ; \
+	echo "HAVE_DOT               = NO" >> Doxyfile ; \
+	echo "GENERATE_HTML          = YES" >> Doxyfile ;\
+	$(mkinstalldirs) $(top_builddir)/apidocs ; \
+	rm -f $(top_builddir)/apidocs/common ; \
+	if test -d $(top_srcdir)/doc/common; then \
+	   common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
+	else \
+	   common_dir=$(kde_libs_htmldir)/en/common ;\
+	fi ;\
+	$(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\
+	doxygen Doxyfile; \
+	rm -f Doxyfile
+
+.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
+
+
+# Local Variables:
+# mode: makefile
+# End:

admin/Makefile.common

+### Makefile.common
+###
+### Copyright (C) 2002 by the KDE developers
+
+### All the real work is done by the shellscript cvs.sh
+
+SHELL=/bin/sh
+
+cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
+	@admindir=$(admindir); \
+	if test "x$$admindir" = x; then \
+	  admindir=.; until test -f $$admindir/admin/cvs.sh; do \
+	    admindir=$$admindir/..; \
+	    if test `cd $$admindir && pwd` = / ; then break; fi; \
+	  done; \
+	  admindir=$$admindir/admin; \
+	  if test -f $$admindir/cvs.sh; then :; else \
+	    echo "Can't find the admin/ directory in any parent of the"; \
+	    echo "current directory.  Please set it with admindir=..."; \
+	    exit 1; \
+	  fi; \
+	fi; \
+	if test "$@" = "package-merge"; then \
+		MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
+	  	$(SHELL) $$admindir/cvs.sh package-merge ;\
+	else \
+		MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
+	fi
+
+configure.in: configure.files subdirs
+configure.files: subdirs
+
+svn: cvs
+
+.SILENT:
+
+.PHONY: svn cvs dist package-merge package-messages

admin/configure.in.bot.end

+# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
+if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
+  # And if so, warn when they don't match
+  if test "$kde_libs_prefix" != "$given_prefix"; then
+    # And if kde doesn't know about the prefix yet
+    echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
+    if test $? -ne 0; then
+      echo ""
+      echo "Warning: you chose to install this package in $given_prefix,"
+      echo "but KDE was found in $kde_libs_prefix."
+      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
+      echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
+      echo "Then restart KDE."
+      echo ""
+    fi
+  fi
+fi
+
+if test "$all_tests" = "bad"; then
+  if test ! "$cache_file" = "/dev/null"; then
+    echo ""
+    echo "Please remove the file $cache_file after changing your setup"
+    echo "so that configure will find the changes next time."
+    echo ""
+  fi
+else
+  echo ""
+  echo "Good - your configure finished. Start make now"
+  echo ""
+fi

admin/deps.am

+$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in
+	@cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4
+
+$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh
+	@cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in
+
+$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES)
+	@cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh
+
+$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh
+	@cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am
+
+$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh
+	@cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs
+
+# defining default rules for files that may not be present
+$(top_srcdir)/Makefile.am.in:
+$(CONF_FILES):
+

rings/Makefile.am

+sflphoneringsdir = $(datadir)/sflphone/rings
+sflphonerings_DATA = \
+	konga.ul\
+	phone.au\
+	phone2.au
\ No newline at end of file

skins/Makefile.am

+SUBDIRS = emetal metal