Packaging of dbus c++ bindings

Removal of the /libs/dbus directory

Packaging of dbus c++ bindings
d0420155 · Emmanuel Milou · 88c20e22 · 88c20e22 · 88c20e22 · 88c20e22
Commit d0420155 authored 16 years ago by Emmanuel Milou
--- a/libs/dbus/AUTHORS
+++ b/libs/dbus/AUTHORS
-Paolo Durante	<shackan@gmail.com>
--- a/libs/dbus/COPYING
+++ b/libs/dbus/COPYING
--- a/libs/dbus/ChangeLog
+++ b/libs/dbus/ChangeLog
--- a/libs/dbus/INSTALL
+++ b/libs/dbus/INSTALL
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
--- a/libs/dbus/Makefile.am
+++ b/libs/dbus/Makefile.am
-SUBDIRS = src tools data doc examples
-
-EXTRA_DIST = autogen.sh libdbus-c++.spec libdbus-c++.spec.in
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = dbus-c++-1.pc
-
-MAINTAINERCLEANFILES = \
-	configure \
-	Makefile.in \
-	aclocal.m4 \
-	compile \
-	config.guess \
-	config.sub \
-	depcomp \
-	install-sh \
-	ltmain.sh \
-	mdate-sh \
-	missing \
-	mkinstalldirs \
-	libdbus-c++.spec
-
--- a/libs/dbus/NEWS
+++ b/libs/dbus/NEWS
--- a/libs/dbus/README
+++ b/libs/dbus/README
--- a/libs/dbus/SConscript
+++ b/libs/dbus/SConscript
-#
-# library
-#
-
-env = WengoGetEnvironment()
-
-env.ParseConfig('pkg-config --cflags --libs dbus-1')
-
-libs = [
-	'expat'
-]
-lib_path = []
-include_path = [
-	'include'
-]
-defines = {
-	'DBUS_API_SUBJECT_TO_CHANGE':1,
-	'DEBUG':1
-}
-headers = []
-sources = [
-	'src/connection.cpp',
-	'src/debug.cpp',
-	'src/dispatcher.cpp',
-	'src/error.cpp',
-	'src/eventloop.cpp',
-	'src/interface.cpp',
-	'src/introspection.cpp',
-	'src/property.cpp',
-	'src/message.cpp',
-	'src/object.cpp',
-	'src/pendingcall.cpp',
-	'src/server.cpp',
-	'src/types.cpp',
-	'src/xml.cpp'
-]
-
-env.WengoAddDefines(defines)
-env.WengoAddIncludePath(include_path)
-env.WengoUseLibraries(libs)
-env.WengoStaticLibrary('dbus-c++', sources)
-
-#
-# tools
-#
-
-tools_env = WengoGetEnvironment()
-
-tools_libs = [
-	'dbus-c++'
-]
-tools_defines = {
-	'DBUS_API_SUBJECT_TO_CHANGE':1,
-}
-introspect_sources = [
-	'tools/introspect.cpp',
-]
-
-xml2cpp_sources = [
-	'tools/xml2cpp.cpp'
-]
-
-#tools_env.Append(LINKFLAGS = '-z origin')
-#tools_env.Append(RPATH = env.Literal('\\$$ORIGIN\.'))
-
-tools_env.WengoAddDefines(tools_defines)
-tools_env.WengoAddIncludePath(include_path)
-tools_env.WengoUseLibraries(tools_libs)
-
-dbusxx_introspect = tools_env.WengoProgram('dbusxx-introspect', introspect_sources)
-dbusxx_xml2cpp = tools_env.WengoProgram('dbusxx-xml2cpp', xml2cpp_sources)
-
-#
-# xml translator
-#
-
-def dbusxx_xml2cpp_emitter(target, source, env):
-	env.Depends(target, dbusxx_xml2cpp)
-	return (target, source)
-
-dbusxx_xml2cpp_builder = Builder(action = dbusxx_xml2cpp[0].abspath + ' $SOURCE --adaptor=$TARGET',
-	emitter = dbusxx_xml2cpp_emitter,
-	suffix = '.h', src_suffix = '.xml')
-
-Export('dbusxx_xml2cpp_builder')
--- a/libs/dbus/TODO
+++ b/libs/dbus/TODO
-* Implement asynchronous method calls (hint: start from DBus::PendingCall)
-* ...and patch the codegen to generate stubs for them
-* Implement continuations in a saner way
-* Find time for some hardcore valgrinding
-* Make DBus::Server free an incoming connection when it's disconnected, not when freeing the server
-* More examples
-* Inline (Doxygen-style) documentation
-* Native protocol implementation (as an alternative to libdbus)
--- a/libs/dbus/autogen.sh
+++ b/libs/dbus/autogen.sh
-#!/bin/bash
-
-function autocmd()
-{
-	echo "Running ${1}..."
-	$* || {
-		echo "Error running ${1}"
-		exit 1
-	}
-}
-
-autocmd libtoolize --force --copy
-autocmd aclocal
-autocmd autoheader
-autocmd automake --add-missing --force-missing --copy -Wall
-autocmd autoconf
-
-echo "Autogen done, now you can ./configure"
--- a/libs/dbus/configure.ac
+++ b/libs/dbus/configure.ac
-# Autojunk script for libdbus-c++
-
-AC_PREREQ(2.59)
-AC_INIT([libdbus-c++], 0.5.0, [shackan@gmail.com])
-
-AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION)
-AM_CONFIG_HEADER([include/dbus-c++/config.h])
-
-AC_CANONICAL_HOST
-
-AC_SUBST(PACKAGE_VERSION)
-
-
-# Set configuration options
-
-AC_ARG_ENABLE(debug,
-	AS_HELP_STRING([--enable-debug],
-		[enable debugging support]),
-	[enable_debug=$enableval],
-	[enable_debug=no]
-)
-
-AC_ARG_ENABLE(glib,
-	AS_HELP_STRING([--enable-glib],
-		[enable glib integration]),
-	[enable_glib=$enableval],
-	[enable_glib=no]
-)
-
-AC_ARG_ENABLE(doxygen-docs,
-	AS_HELP_STRING([--enable-doxygen-docs],
-		[build DOXYGEN documentation (requires Doxygen)]),
-	[enable_doxygen_docs=$enableval],
- 	[enable_doxygen_docs=no]
-)
-
-# Check for programs
-
-AC_LANG_CPLUSPLUS
-
-AC_PROG_CC
-AC_PROG_CXX
-
-CXX_FOR_BUILD=${CXX_FOR_BUILD-${CXX}}
-AC_SUBST(CXX_FOR_BUILD)
-
-AM_PROG_LIBTOOL
-
-PKG_PROG_PKG_CONFIG
-
-
-AC_MSG_CHECKING([whether $CXX supports symbol visibility])
-
-vtest=`$CXX --help --verbose 2>&1 | grep fvisibility`
-
-if test -n "$vtest"; then
-	AC_MSG_RESULT(yes)
-
-	AC_DEFINE(GCC_HASCLASSVISIBILITY, 1, [to enable hidden symbols])
-	CXXFLAGS="-fvisibility=hidden"
-else
-	AC_MSG_RESULT(no)
-fi 
-
-
-# Check for dependencies
-
-DBUS_REQUIRED_VERSION=0.60
-PKG_CHECK_MODULES(dbus, [dbus-1 >= $DBUS_REQUIRED_VERSION],,
-	AC_MSG_ERROR([You need the DBus libraries (version 0.6 or better)]
-	[http://www.freedesktop.org/wiki/Software_2fdbus])
-)
-AC_SUBST(dbus_CFLAGS)
-AC_SUBST(dbus_LIBS)
-
-DBUS_API_STABLE_VERSION=1.0.0
-PKG_CHECK_EXISTS([dbus-1 < $DBUS_API_STABLE_VERSION],
-	[AC_DEFINE(DBUS_API_SUBJECT_TO_CHANGE, , [unstable DBus])]
-)
-
-DBUS_THREADS_INIT_DEFAULT_VERSION=0.93
-PKG_CHECK_EXISTS([dbus-1 >= $DBUS_THREADS_INIT_DEFAULT_VERSION],
-	[AC_DEFINE(DBUS_HAS_THREADS_INIT_DEFAULT, , [dbus_threads_init_default (needs DBus >= 0.93)])]
-)
-
-DBUS_RECURSIVE_MUTEX_VERSION=0.95
-PKG_CHECK_EXISTS([dbus-1 >= $DBUS_RECURSIVE_MUTEX_VERSION],
-	[AC_DEFINE(DBUS_HAS_RECURSIVE_MUTEX, , [DBus supports recursive mutexes (needs DBus >= 0.95)])]
-)
-
-
-if test "$enable_glib" = "yes" ; then
-PKG_CHECK_MODULES([glib], glib-2.0)
-AC_SUBST(glib_CFLAGS)
-AC_SUBST(glib_LIBS)
-AM_CONDITIONAL(ENABLE_GLIB, test 1 = 1)
-PKG_CHECK_MODULES([gtkmm], gtkmm-2.4,
-	AM_CONDITIONAL(HAVE_GTKMM, test 1 = 1),
-	AM_CONDITIONAL(HAVE_GTKMM, test 0 = 1)
-)
-AC_SUBST(gtkmm_CFLAGS)
-AC_SUBST(gtkmm_LIBS)
-else
-AM_CONDITIONAL(ENABLE_GLIB, test 0 = 1)
-AM_CONDITIONAL(HAVE_GTKMM, test 0 = 1)
-fi
-
-AC_CHECK_LIB([expat], XML_ParserCreate_MM,
-   	[AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false)],
-	have_expat=false)
-
-if ! $have_expat; then
-	AC_MSG_ERROR([You need the eXpat xml parser]
-		[http://expat.sourceforge.net/])
-fi
-
-xml_CFLAGS=
-xml_LIBS=-lexpat
-
-AC_SUBST(xml_CFLAGS)
-AC_SUBST(xml_LIBS)
-
-AC_CHECK_LIB([pthread], pthread_create,
-	[AC_CHECK_HEADERS(pthread.h, have_pthread=true, have_pthread=false)],
-	have_pthread=false)
-
-AM_CONDITIONAL(HAVE_PTHREAD, test "$have_pthread" = "true")
-
-if test "$enable_debug" = "yes" ; then
-	CXXFLAGS="$CXXFLAGS -Wall -ggdb -O0 -DDEBUG"
-else
-	CXXFLAGS="$CXXFLAGS -Wall -O3"
-fi
-
-
-# Doxygen Documentation
-
-AC_PATH_PROG(DOXYGEN, doxygen, no)
-
-AC_MSG_CHECKING([whether to build Doxygen documentation])
-
-if test "$DOXYGEN" = "no" ; then
-	have_doxygen=no
-else
-	have_doxygen=yes
-fi
-
-if test "$enable_doxygen_docs" = "auto" ; then
-	enable_doxygen_docs=no
-
-	AC_MSG_RESULT(no)
-fi
-
-if test "$enable_doxygen_docs" = "yes" ; then
-	if test "$have_doxygen" = "no"; then
-		AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found])
-	fi
-
-	AC_MSG_RESULT(yes)
-fi
-
-AM_CONDITIONAL(DBUS_DOXYGEN_DOCS_ENABLED, test "$enable_doxygen_docs" = "yes")
-
-# For the tools/, we need libdbus-c++ for the "build" architecture as well
-
-AM_CONDITIONAL(CROSS_COMPILING, test "$cross_compiling" = "yes")
-
-AC_ARG_WITH(build-libdbus-cxx,
-	AS_HELP_STRING([--with-build-libdbus-cxx],
-	[For cross compilation: path to libdbus-cxx which was compiled for the 'build' system.]),
-	[ BUILD_LIBDBUS_CXX_DIR=${withval} ],
-	[ BUILD_LIBDBUS_CXX_DIR="\$(top_builddir)" ]
-)
-AC_SUBST(BUILD_LIBDBUS_CXX_DIR)
-
-
-# Save processed files
-
-AC_OUTPUT(
-	Makefile
-	src/Makefile
-	tools/Makefile
-	data/Makefile
-	doc/Makefile
-	doc/Doxyfile
-	examples/Makefile
-	examples/properties/Makefile
-	examples/echo/Makefile
-	examples/hal/Makefile
-	examples/glib/Makefile
-	dbus-c++-1.pc
-	libdbus-c++.spec
-)
--- a/libs/dbus/data/Makefile.am
+++ b/libs/dbus/data/Makefile.am
-EXTRA_DIST = org.freedesktop.DBus.xml
-
-MAINTAINERCLEANFILES = \
-	Makefile.in
--- a/libs/dbus/data/org.freedesktop.DBus.xml
+++ b/libs/dbus/data/org.freedesktop.DBus.xml
-<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
-<node>
-  <interface name="org.freedesktop.DBus.Introspectable">
-    <method name="Introspect">
-      <arg name="data" direction="out" type="s"/>
-    </method>
-  </interface>
-  <interface name="org.freedesktop.DBus">
-    <method name="RequestName">
-      <arg direction="in" type="s"/>
-      <arg direction="in" type="u"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="ReleaseName">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="StartServiceByName">
-      <arg direction="in" type="s"/>
-      <arg direction="in" type="u"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="Hello">
-      <arg direction="out" type="s"/>
-    </method>
-    <method name="NameHasOwner">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="b"/>
-    </method>
-    <method name="ListNames">
-      <arg direction="out" type="as"/>
-    </method>
-    <method name="AddMatch">
-      <arg direction="in" type="s"/>
-    </method>
-    <method name="RemoveMatch">
-      <arg direction="in" type="s"/>
-    </method>
-    <method name="GetNameOwner">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="s"/>
-    </method>
-    <method name="ListQueuedOwners">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="as"/>
-    </method>
-    <method name="GetConnectionUnixUser">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="GetConnectionUnixProcessID">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="u"/>
-    </method>
-    <method name="GetConnectionSELinuxSecurityContext">
-      <arg direction="in" type="s"/>
-      <arg direction="out" type="ay"/>
-    </method>
-    <method name="ReloadConfig">
-    </method>
-    <signal name="NameOwnerChanged">
-      <arg type="s"/>
-      <arg type="s"/>
-      <arg type="s"/>
-    </signal>
-    <signal name="NameLost">
-      <arg type="s"/>
-    </signal>
-    <signal name="NameAcquired">
-      <arg type="s"/>
-    </signal>
-  </interface>
-</node>
--- a/libs/dbus/dbus-c++-1.pc.in
+++ b/libs/dbus/dbus-c++-1.pc.in
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: dbus-c++
-Description: Native C++ bindings for D-Bus.
-Requires: dbus-1
-Version: @VERSION@
-Libs: -L${libdir} -ldbus-c++-1
-Cflags: -I${includedir}/dbus-c++-1 -DDBUS_API_SUBJECT_TO_CHANGE
--- a/libs/dbus/doc/Doxyfile.in
+++ b/libs/dbus/doc/Doxyfile.in
-# Doxyfile 1.4.6
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = @PACKAGE@
-PROJECT_NUMBER         = @VERSION@
-OUTPUT_DIRECTORY       = @top_srcdir@/doc/
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-USE_WINDOWS_ENCODING   = NO
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = NO
-STRIP_FROM_PATH        = 
-STRIP_FROM_INC_PATH    = 
-SHORT_NAMES            = NO
-JAVADOC_AUTOBRIEF      = YES
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP         = NO
-INHERIT_DOCS           = YES
-SEPARATE_MEMBER_PAGES  = NO
-TAB_SIZE               = 4
-ALIASES                = 
-OPTIMIZE_OUTPUT_FOR_C  = NO
-OPTIMIZE_OUTPUT_JAVA   = NO
-BUILTIN_STL_SUPPORT    = YES
-DISTRIBUTE_GROUP_DOC   = NO
-SUBGROUPING            = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL            = YES
-EXTRACT_PRIVATE        = NO
-EXTRACT_STATIC         = NO
-EXTRACT_LOCAL_CLASSES  = NO
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-HIDE_FRIEND_COMPOUNDS  = YES
-HIDE_IN_BODY_DOCS      = NO
-INTERNAL_DOCS          = NO
-CASE_SENSE_NAMES       = YES
-HIDE_SCOPE_NAMES       = NO
-SHOW_INCLUDE_FILES     = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-SORT_BRIEF_DOCS        = NO
-SORT_BY_SCOPE_NAME     = NO
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-SHOW_USED_FILES        = YES
-SHOW_DIRECTORIES       = NO
-FILE_VERSION_FILTER    = 
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = YES
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = YES
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = NO
-WARN_FORMAT            = 
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = @top_srcdir@/src/ @top_srcdir@/include/
-FILE_PATTERNS          = *.cpp \
-                         *.h
-RECURSIVE              = YES
-EXCLUDE                = 
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = Makefile.* \
-                         ChangeLog \
-                         CHANGES \
-                         CHANGES.* \
-                         README \
-                         README.* \
-                         *.png \
-                         AUTHORS \
-                         DESIGN \
-                         DESIGN.* \
-                         *.desktop \
-                         DESKTOP* \
-                         COMMENTS \
-                         HOWTO \
-                         magic \
-                         NOTES \
-                         TODO \
-                         THANKS
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = 
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = 
-INPUT_FILTER           = 
-FILTER_PATTERNS        = 
-FILTER_SOURCE_FILES    = NO
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = NO
-STRIP_CODE_COMMENTS    = YES
-REFERENCED_BY_RELATION = YES
-REFERENCES_RELATION    = YES
-USE_HTAGS              = NO
-VERBATIM_HEADERS       = YES
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = NO
-COLS_IN_ALPHA_INDEX    = 5
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = 
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-CHM_FILE               = 
-HHC_LOCATION           = 
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 4
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = NO
-LATEX_OUTPUT           = 
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = NO
-USE_PDFLATEX           = NO
-LATEX_BATCHMODE        = NO
-LATEX_HIDE_INDICES     = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = 
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = 
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-XML_OUTPUT             = xml
-XML_SCHEMA             = 
-XML_DTD                = 
-XML_PROGRAMLISTING     = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD       = NO
-PERLMOD_LATEX          = NO
-PERLMOD_PRETTY         = YES
-PERLMOD_MAKEVAR_PREFIX = 
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = YES
-EXPAND_ONLY_PREDEF     = YES
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = DOXYGEN_SHOULD_SKIP_THIS
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = NO
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = 
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = YES
-HIDE_UNDOC_RELATIONS   = YES
-HAVE_DOT               = NO
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-GROUP_GRAPHS           = YES
-UML_LOOK               = NO
-TEMPLATE_RELATIONS     = YES
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-CALL_GRAPH             = NO
-GRAPHICAL_HIERARCHY    = YES
-DIRECTORY_GRAPH        = YES
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_WIDTH    = 640
-MAX_DOT_GRAPH_HEIGHT   = 1024
-MAX_DOT_GRAPH_DEPTH    = 1000
-DOT_TRANSPARENT        = NO
-DOT_MULTI_TARGETS      = NO
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = NO
--- a/libs/dbus/doc/Makefile.am
+++ b/libs/dbus/doc/Makefile.am
-if DBUS_DOXYGEN_DOCS_ENABLED
-
-EXTRA_DIST = Doxyfile.in
-
-noinst_PROGRAMS = index.html
-
-index_html_SOURCES = Doxyfile
-
-index.html: Doxyfile
-	doxygen Doxyfile
-
-endif
-
-MAINTAINERCLEANFILES = \
-	Makefile.in
--- a/libs/dbus/doc/html/Makefile.am
+++ b/libs/dbus/doc/html/Makefile.am
-CLEANFILES = *.html *.css *.png *.gif
-
-MAINTAINERCLEANFILES = \
-	Makefile.in
--- a/libs/dbus/examples/Makefile.am
+++ b/libs/dbus/examples/Makefile.am
-SUBDIRS = properties echo hal glib
-
-MAINTAINERCLEANFILES = \
-	Makefile.in
-
--- a/libs/dbus/examples/echo/Makefile.am
+++ b/libs/dbus/examples/echo/Makefile.am
-EXTRA_DIST = README echo-introspect.xml
-
-AM_CPPFLAGS = -I$(top_srcdir)/include
-
-noinst_PROGRAMS = echo-server
-
-echo_server_SOURCES = echo-server-glue.h echo-server.h echo-server.cpp
-echo_server_LDADD = $(top_builddir)/src/libdbus-c++-1.la
-
-echo-server-glue.h: echo-introspect.xml
-	$(top_builddir)/tools/dbusxx-xml2cpp $^ --adaptor=$@
-
-if HAVE_PTHREAD
-noinst_PROGRAMS += echo-client-mt
-endif
-
-echo_client_mt_SOURCES = echo-client-glue.h echo-client.h echo-client.cpp
-echo_client_mt_LDADD = $(top_builddir)/src/libdbus-c++-1.la -lpthread
-
-echo-client-glue.h: echo-introspect.xml
-	$(top_builddir)/tools/dbusxx-xml2cpp $^ --proxy=$@
-
-BUILT_SOURCES = echo-server-glue.h echo-client-glue.h
-CLEANFILES = $(BUILT_SOURCES)
-
-dist-hook:
-	cd $(distdir); rm -f $(BUILT_SOURCES)
-
-MAINTAINERCLEANFILES = \
-	Makefile.in
--- a/libs/dbus/examples/echo/README
+++ b/libs/dbus/examples/echo/README
-This is probably the most simple D-Bus program you could conceive
-
-To test, run `DBUSXX_VERBOSE=1 ./echo-server` and try the following commands:
-
-dbus-send --dest=org.freedesktop.DBus.Examples.Echo --type=method_call --print-reply /org/freedesktop/DBus/Examples/Echo org.freedesktop.DBus.EchoDemo.Random
-
-dbus-send --dest=org.freedesktop.DBus.Examples.Echo --type=method_call --print-reply /org/freedesktop/DBus/Examples/Echo org.freedesktop.DBus.EchoDemo.Hello string:"world"
-
-dbus-send --dest=org.freedesktop.DBus.Examples.Echo --type=method_call --print-reply /org/freedesktop/DBus/Examples/Echo org.freedesktop.DBus.EchoDemo.Sum array:int32:10,100,250
-
-dbus-send --dest=org.freedesktop.DBus.Examples.Echo --type=method_call --print-reply /org/freedesktop/DBus/Examples/Echo org.freedesktop.DBus.EchoDemo.Info
-
-or, using python instead
-
-$ python
-import dbus
-bus = dbus.SessionBus()
-object = bus.get_object('org.freedesktop.DBus.Examples.Echo','/org/freedesktop/DBus/Examples/Echo')
-echo = dbus.Interface(object, dbus_interface='org.freedesktop.DBus.EchoDemo')
-echo.Random()
-echo.Hello("world")
-echo.Sum([123, 234, 95, 520])
-echo.Info()